Matrix Telecom SARVAM UMG System Manual page 137

Route on the basis of Calling Party Number
In this method, a call received on the FXO Port is routed to a specific destination number, as per the calling party's
number. For this, the calling party numbers and their corresponding destination numbers must be configured in the
Calling Party Number Based Table.
Whenever there is an incoming call on the FXO Port, SARVAM UMG will match the Calling Party Number with the
entries of the Calling Party Number Based Table. If a match is found, the call will be routed to the destination
number configured for that Calling Party Number.
To apply this method, do the following:
• In Route all incoming calls (with CLI), select on the basis of Calling Party Number.
• Click Settings
131
.
Matrix SARVAM UMG System Manual