Matrix Telecom SARVAM UMG System Manual page 353

In the If no match found in the Calling Party Number Table, route calls box, select the desired method
from the following options for processing the call:
• to a Fixed Destination Number
• on the basis of DDI Number
• to the Called Party Number
• after Answering the Call and Collecting the Digits
Default: to the Called Party Number.
Route on the basis of DDI Number
In this method, incoming calls on the T1E1 Port are routed to specific numbers as per the DDI number received in
the SETUP message on the T1E1 Port.
To apply this method, do the following:
• In Route all Incoming calls (with CLI), select on the basis of DDI Number.
• Click Settings
347
.
Matrix SARVAM UMG System Manual