•
To apply this method, in Route all incoming calls (with CLI), select without any Destination Number.
Route to a Fixed Destination Number
In this method, calls received on the SIP Trunk are routed to a fixed destination number, which is configured for the
SIP Trunk.
To apply this method, do the following:
•
In Route all Incoming calls (with CLI), select to the Fixed Destination Number.
•
In the Fixed Destination Number box that appears, enter the desired destination number. The
Destination Number may consist of a maximum of 24 digits. Valid digits are 0 to 9, *, # and . (dot/period).
Default: Blank.
•
Click Submit to save your settings.
Route on the basis of Calling Party Number
In this method, a call received on the SIP Trunk is routed to a specific number, as per the calling party's number.
You must configure the calling party numbers in the Calling Party Number Based Table.
When there is an incoming call on the SIP Trunk, SARVAM UMG will match the Calling Party Number with the
entries of the Calling Party Number Based Table. If a match is found, the call is routed to the destination number
configured for that Calling Party Number.
To apply this method, do the following:
•
In Route all Incoming calls (with CLI), select on the basis of Calling Party Number.
Matrix SARVAM UMG System Manual
300
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?