Matrix Telecom SARVAM UMG System Manual page 288

• The Automatic Number Translation Table window opens.
• You may configure the default Automatic Number Translation Table or any other Table. See
"Automatic Number Translation (ANT)"
• Click Submit to save the ANT Table and close the window.
• Return to ANT parameter and assign the ANT Table you configured.
• Set the duration of the Pause Timer, if you have configured ^ (Pause) in the Add Prefix column of the
ANT Table. Valid range is 1 to 9 seconds. Default: 2 seconds.
• Select the Apply No Response Timer check box. The system will route the call through a Fallback
Routing Group or Port, if a response other than—Alert, Connect, Busy, No Reply, Disconnect with cause
as Busy or No Reply—is received from the network within the specified time period. Default: Disabled.
• Set the duration of the No Response Timer, if you have enabled the Apply No Response Timer option.
It is the time for which SARVAM UMG will wait for the valid response from the network for any request.
If no valid response is received before the expiry of this timer, SARVAM UMG will fallback to alternate
Routing Group or Port for further processing of the call. Valid range is 01 to 99 seconds. Default: 10
seconds.
To apply Fallback logic on the Mobile Port, make sure you have enabled Fallback Routing Group under
"Destination Port
• Enable Route calls returned unconnected to Original Caller, if you want SARVAM UMG to route
outgoing calls made from this port that return unconnected back to the original caller.
Matrix SARVAM UMG System Manual
Determination".
to configure the ANT Table.
282