Table of Contents
Advertisement
•
Calls originated from FXO Ports: The system will generate report of calls that originated from the
FXO Ports. Set the range of the FXO Ports in the From and To fields.
You can generate report for a single FXO Port, by setting the same port number in the From and To
fields.
•
Calls originated from BRI Ports: The system will generate report of calls that originated from the BRI
Ports. To generate report using this filter for a range of ports, set the range of the BRI Ports in the From
and To fields.
You can also generate report for a single BRI Port, by setting the same port number in the From and To
fields.
•
Calls originated from BRI Channels: The system will generate report of calls that originated from
each BRI Channel. To generate report using this filter for a range of channels, set the range of the BRI
Channels in the From and To fields.
You can also generate report for a single channel, by setting the same channel number in the From
and To fields.
•
Calls originated from Mobile Ports: The system will generate report of calls that originated from the
Mobile Ports. Set the range of the Mobile Ports in the From and To fields.
You can generate report for a single Mobile Port by setting the same port number in the From and To
fields.
•
Calls originated from T1E1 Ports: The system will generate report of calls that originated from the
T1E1 Ports. To generate report using this filter for a range of ports, set the range of the T1E1 Ports in
the From and To fields.
You can also generate report for a single T1E1 Port, by setting the same port number in the From and
To fields.
•
Calls originated from T1E1 Channels: The system will generate report of calls that originated from
each T1E1 Channel. To generate report using this filter for a range of channels, set the range of the
T1E1 Channels in the From and To fields.
You can also generate report for a single T1E1 channel, by setting the same channel number in the
From and To fields.
•
Calls terminated on FXS Ports: The system will generate report of calls that terminated on FXS Ports.
To generate report using this filter for both FXS Ports, set the range of the FXS Ports in the From and
To fields.
You can also generate report for a single FXS Port, by setting the same port number in the From and
To fields.
•
Calls terminated on SIP Trunks: The system will generate report of calls terminated on the SIP
Trunks. To generate report using this filter for a range of SIP Trunks, set the range of the SIP Trunks in
the From and To fields.
To generate report for calls terminated on a single SIP Trunk, set the same trunk number in both fields.
Matrix SARVAM UMG System Manual
576
Advertisement
Table of Contents
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?