Matrix Telecom SARVAM UMG System Manual page 452

• Ask Address Number Information (ANI) specifies the backward group A tone used to ask the
outbound end whether it has ANI digits to be sent. This parameter is also known as Request ANI
Category. Valid range is 00/ 01 to 15. If no tone is sent by the inbound end, set this parameter to 00.
For India, this parameter is set to 04. Default: 05.
• Positive Response to Ask ANI specifies that the Group 1 forward tone is to be received by the
inbound end from the outbound which in turn indicates that outbound end has ANI digits to be sent.
This parameter is also known as ANI category. Valid range is 01 to 15. Default: 01.
For example, In India I-1 or I-10 is sent by the outbound end. In Kuwait, I-6 is sent. This parameter
cannot be zero because; Is ANI Available request will be made by the inbound end only if the country
supports this protocol.
• Negative Response to Ask ANI specifies the Group 1 forward tone to be received by the inbound end
from the outbound which would indicate that outbound end has ANI digits to be sent. This parameter is
also known as ANI category. Valid range is 01 to 15. Default: 10.
For example, in India I-1 or I-10 is sent by the outbound end. In Kuwait, I-6 is sent. This parameter
cannot be zero because; Is ANI Available request will be made by the inbound end only if the country
supports this protocol.
• ANI End Tone Presentation Allowed specifies the Group I tone that the inbound end should expect
from the outbound end to consider End of ANI digits with information that the Presentation of ANI by
the outbound end is allowed. Valid range is 00/ 01 to 15. Default: 15. If no tone is sent, set this
parameter to 00. For India use A-4, for China use A-1.
• ANI End Tone Presentation Restricted specifies the group I tone that the inbound end shall expect
from the outbound end to consider End of ANI digits with an information that the Presentation of ANI by
the outbound end is Restricted. Valid range is 00/ 01 to 15. Default: 00. If no tone is sent, set this
parameter to 00. For India use A-4, for China use A-1.
• Ask Calling Party Sub Category specifies the group 1 tone that the inbound end shall expect from the
outbound end to consider End of ANI digits with an information that the Presentation of ANI by the
outbound end is Restricted. Select the check box to enable. Default: Disabled.
Forward Group II
• Ordinary Subscriber specifies the forward group II tone used to inform the inbound end that the
calling party is an Ordinary Subscriber. This signal is sent in response to Calling Party Category signal
Request from the inbound end. Valid range is 00/ 01 to 15. Default: 01. If this parameter is not
applicable, assign 00.
• Priority Subscriber specifies the forward group II tone used to inform the inbound end that the calling
party is a Priority Subscriber. This signal is sent in response to Calling Party Category signal Request
from the inbound end. Valid range is 00/ 01 to 15. Default: 02. If this parameter is not applicable, assign
00.
• Maintenance Equipment specifies the forward group II tone used to inform the inbound end that the
calling party is Maintenance equipment. Valid range is 00/ 01 to 15. Default: 03. If this parameter is not
applicable, assign 00.
• Operator specifies the forward group II tone used to inform the inbound end that the calling party is
Operator. Valid range is 00/ 01 to 15. Default: 05. If this parameter is not applicable, assign 00.
Matrix SARVAM UMG System Manual 446