Protecting Eternity Genx Platform And Yourself - Matrix Telecom SARVAM UMG System Manual

Protecting ETERNITY GENX Platform and Yourself

The ETERNITY GENX is an electronic device. When you handle any electrical or electronic equipment, you are in
a situation that could cause you bodily harm, besides damage to the product. When handling any electronic
equipment, you must be aware of the safety hazards involved in electrical circuitry and the standard practices for
accident prevention.
When using any telephone equipment, take every safety precaution to reduce the risk of fire, electric shock and
injury to persons. Read and understand the precautions, dos and don'ts of handling this product listed below.
These instructions are by no means exhaustive. So, take all the necessary precautions for handling electronic and
electrical appliances. Your safety and that of the others lies in your hands.
Location
• Do not place this product in any of the following locations:
• Near a water source like a wash bowl, kitchen sink, laundry tub, near a swimming pool, or in a wet
basement.
• In places where dust, oil, corrosive fumes may come in contact with the system.
• Any area where it is exposed to direct sunlight, heat, excessive cold or humidity.
• On moveable or unstable surfaces, which may cause the product to fall and get damaged.
• Any area where shocks or vibration are frequent or strong.
• Near High-Frequency generating devices such as Electric Welder, Sewing Machine or/and Microwave
Oven.
• Do not leave cables exposed on the ground where they may be trampled upon, or get damaged by
entangling with feet or pressure from other heavy objects.
Power Supply
• This product should be operated with proper supply voltage. If you are not sure about supply voltage,
contact authorized dealer.
• The ETERNITY GENX does not work in isolation from the environment. Power is fed to the system for
functioning of the system. Being an ETERNITY GENX platform with SARVAM UMG application, it the
interfaces for various types of trunk lines and extensions. So there are chances of heavy voltages entering
the system through these interfaces. Also, static charges could find their way through the system
components.
Protect the system from heavy voltages from the mains
• The ETERNITY GENX is designed to work with input voltages ranging between 100-240VAC. The Power
Supply Card of ETERNITY GENX have a 'switch mode' design to support such a wide range of operating
voltage.
Matrix SARVAM UMG System Manual 26