Matrix Telecom SARVAM UMG System Manual page 461

• Click the Basic Settings link to expand.
• Click the Login Password link.
Under Command,
• Enter New Password.
• In Confirm New Password, re-enter the new password to confirm.
• Click Submit to save.
When you default the system, Command Password will not be set to default.
Forgot the Login Password?
If you have already changed the default Jeeves/Command Password (1234) and are unable to recall or locate it,
you can restore the default Jeeves/Command Password using the Jumper.
Restoring Default Login Password
To restore the Default Jeeves/Command Password by changing the Jumper (J1) Settings on the CPU Card,
• Switch off the power supply.
• Remove the CPU Card from the slot.
• Locate Jumper (J1) on the PCB of the CPU Card.
• Change the position of the Jumper from BC to AB (that is, from 'Normal' to 'Reset Login Password')
• Reinsert the CPU Card into the slot.
• Switch ON the system and wait for the system to initialize.
• Switch OFF the system and remove the CPU Card from the slot.
• Change the Jumper position from AB to the original position BC.
455 Matrix SARVAM UMG System Manual