Matrix Telecom SARVAM UMG System Manual page 260

Route Calls without any Destination Number
In this method, all calls received on the Mobile Port are directly routed to the destination port, regardless of the
Destination Number.
• To apply this method, in Route all incoming calls (with CLI), select without any Destination Number.
Route to the Fixed Destination Number
In this method, calls received on the Mobile Port are routed to a fixed destination number, which you must configure
for this port.
To apply this method, do the following:
• In Route all incoming calls (with CLI), select to the Fixed Destination Number.
• In Fixed Destination Number, enter the desired destination number.
The Destination Number may consist of a maximum of 24 digits. Valid digits are 0 to 9, *, # and (.) dot.
Default: Blank.
• Click Submit to save the changes.
Route on the basis of Calling Party Number
In this method, a call received on the Mobile Port is routed to a specific destination number, as per the calling
party's number. For this, the calling party numbers and their corresponding destination numbers must be configured
in the Calling Party Number Based Table.
Whenever there is an incoming call on the Mobile Port, SARVAM UMG will match the Calling Party Number with
the entries of the Calling Party Number Based Table. If a match is found, the call will be routed to the destination
number configured for that Calling Party Number.
To apply this method, do the following:
• In Route all incoming calls (with CLI), select on the basis of Calling Party Number.
Matrix SARVAM UMG System Manual 254