Make sure that the Call Pick-up feature is enabled in the Class of Service of all the FXS Ports in the group.
See
"Class of
Service".
'0' is used to de-assign an FXS Port from a Call Pick-Up Group.
•
You can apply Automatic Number Translation (ANT) logic on CLI number when call is to be placed on the
FXS Port.
•
To apply ANT logic on the Calling Numbers, select the Automatic Number Translation (ANT) for
Calling Number check box. Default: Disabled.
•
In Use Automatic Number Translation Table, select the ANT Table number you have configured for
the Calling Numbers. Default: Table 5.
If you have not configured the Automatic Number Translation Table,
•
Click Settings
Matrix SARVAM UMG System Manual
.
100
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?