Matrix Telecom SARVAM UMG System Manual page 583

• Calls terminated on FXO Ports: The system will generate report of calls that terminated on the FXO
Ports. Set the range of the FXO Ports in the From and To fields.
You can generate report for a single FXO Port, by setting the same port number in the From and To
fields.
• Calls terminated on BRI Ports: The system will generate report of calls that terminated the BRI Ports.
To generate report using this filter for a range of ports, set the range of the BRI Ports in the From and
To fields.
You can also generate report for a single BRI Port, by setting the same port number in the From and
To fields.
• Calls terminated on BRI Channels: The system will generate report of calls that terminated on each
BRI Channel. To generate report using this filter for a range of channels, set the range of the BRI
Channels in the From and To fields.
You can also generate report for a single channel, by setting the same channel number in the From
and To fields.
• Calls terminated on Mobile Ports: The system will generate report of calls that terminated on the
Mobile Ports. Set the range of ports in the From and To fields. Set the same port number in both fields,
if you want to generate report for calls terminated on a particular Mobile Port.
• Calls terminated from T1E1 Ports: The system will generate report of calls that terminated the T1E1
Ports. To generate report using this filter for a range of ports, set the range of the T1E1 Ports in the
From and To fields.
You can also generate report for a single T1E1 Port, by setting the same port number in the From and
To fields.
• Calls terminated on T1E1 Channels: The system will generate report of calls that terminated on each
T1E1 Channel. To generate report using this filter for a range of channels, set the range of the T1E1
Channels in the From and To fields.
You can also generate report for a single channel, by setting the same channel number in the From
and To fields.
• Calls made From: The system will generate report of calls made between particular dates. Enter the
start date and end date in the corresponding From and To fields.
• Calls made Between: The system will generate report of calls made between a particular time period.
Enter the start time and end time in the corresponding From and To fields.
• Called Party Number Matching with Number List: The system generates report for calls made to
specific numbers.
Select the Number List you want to assign to this filter. Make sure that you also configure this Number
List with the Called Party Numbers which you want the system to match. See
instructions.
• Calling Party Numbers Matching with Number List: The system generates report for calls received
from specific numbers.
577
"Number Lists"
Matrix SARVAM UMG System Manual
for