Matrix Telecom SARVAM UMG System Manual page 392

Hide thumbs Also See for SARVAM UMG:

Table of Contents

In Custom Pulse Width Word 2, set the pulse width for setting pulse shape in the 2nd phase.Valid

range is 001 to 127. Default: 58.

In Custom Pulse Width Word 3, set the pulse width for setting pulse shape in the 3rd phase. Valid

range is 001 to 127. Default: 76.

In Custom Pulse Width Word 4, set the pulse width for setting pulse shape in the 4th phase. Valid

range is 001 to 127. Default: 0.

PRI Settings

If you have selected PRI as Signaling Type, configure the PRI parameters.

Click PRI Settings to expand.

Set the duration of the Overlap Receiving Timer. This timer is relevant while receiving the called party

number information in overlap receiving mode. Valid range is 01 to 99 seconds. Default: 5 seconds.

Select the required option for sending the Caller-Type of Numbering Plan (TON) — Unknown,

International, National, Network Specific, Subscriber, Abbreviated or Reserved. Default: Unknown.

Select the required option for sending the Caller-Numbering Plan Identification (NPI) — Unknown,

ISDN Numbering, Data Numbering, Telex Numbering, National Numbering, Private or Reserved.

Default: ISDN Numbering.

Select the required option for sending the Called-Type of Numbering Plan (TON) — Unknown,

International, National, Network Specific, Subscriber, Abbreviated or Reserved. Default: Unknown.

Matrix SARVAM UMG System Manual

Need help?

Do you have a question about the SARVAM UMG and is the answer not in the manual?