Matrix Telecom SARVAM UMG System Manual page 272

Hide thumbs Also See for SARVAM UMG:

Table of Contents

Select the CLI Number to be sent on Destination Port. You can select Received Calling Party or

Received Called Party. Default: Received Calling Party.

CLI to be sent on Destination Port is applicable when FXS Port/Group is determined as the Destination

Create the Routing Group.

To create a group of sequential FXS Ports as members,

Select the desired FXS Port numbers as members. Default: 1.

In in - order, select the order in which the system should hunt for a free member FXS Port to route

Select Ascending to start hunting from the first to the last member FXS Port. Select Descending to

start hunting from the last to the first member FXS Port. Default: Ascending.

To create a group of not-sequential FXS Ports as members,

Matrix SARVAM UMG System Manual

Need help?

Do you have a question about the SARVAM UMG and is the answer not in the manual?