Matrix Telecom SARVAM UMG System Manual page 228

Hide thumbs Also See for SARVAM UMG:

Table of Contents

T (letter T)

Select the CLI Number to be sent on Destination Port. You can select Received Calling Party or

Received Called Party. Default: Received Calling Party.

CLI to be sent on Destination Port is applicable when FXS Port/Group is determined as the Destination

Create the Routing Group.

To create a group of sequential FXS Ports as members,

Select the desired FXS Port numbers as members. Default:1.

In in - order, select the order in which the system should hunt for a free member FXS Port to route

Select Ascending to start hunting from the first to the last member FXS Port. Select Descending to

start hunting from the last to the first member FXS Port. Default: Ascending.

To create a group of not-sequential FXS Ports as members,

Matrix SARVAM UMG System Manual

+ (plus) can be configured as a first character of the Destination Number string in the

SIP Trunk-Destination Port Determination-Destination Number Based table only.

Hyphen within the bracket, defines a range. Only digits 0-9 are allowed within a bracket.

Comma within a bracket is used as a separator between the groups of numbers.

Caret within a bracket is used to deny or restrict the number or range defined after the

symbol. Only digits 0-9 are allowed after the caret.

Character T can be configured only as a last character in a number string. When

configured in a number string, the system waits for End of Dialing.

Need help?

Do you have a question about the SARVAM UMG and is the answer not in the manual?