Matrix Telecom SARVAM UMG System Manual page 647

Hide thumbs Also See for SARVAM UMG:

Table of Contents

The Debug Settings window opens.

Under the General tab, click Debug Settings to expand.

Select the Debug Enable check box to enable system debug. Default: Disabled.

You will be able to configure the Debug Settings only after you enable this check box.

Select the Save Debug In File check box, if you want to save the debug file in the system. Default:

In Syslog Server IP Address, enter the remote Syslog Server IP Address. Default: Blank.

In Syslog Server Port, enter the port number. The range of the server port is 514, 1024 to 65535.

Default: 514.

Matrix SARVAM UMG System Manual

Need help?

Do you have a question about the SARVAM UMG and is the answer not in the manual?