Matrix Telecom SARVAM UMG System Manual page 436

• Click the respective channel number to configure the parameters.
Configure the routing parameters for each channel.
• Block calls received on this channel.
• Route all Incoming Calls (with CLI), see
• Block Calls received without CLI on this channel.
• Route all Incoming Calls (without CLI), see
• Select the destination port for routing calls, see
• Allowed-Denied Logic, see
• Handling of Outgoing Calls, see
Copy Channel Based Routing Parameters
• You can also copy the settings of a T1E1 Channel to another T1E1 Channel using the Copy button. To do
this,
Matrix SARVAM UMG System Manual
"Handling of Incoming
"Handling of Incoming
"Destination Port
"Allowed - Denied Logic".
"Handling of Outgoing Calls".
Calls".
Calls".
Determination".
430