Matrix Telecom SARVAM UMG System Manual page 350

If the destination number to be dialed out is an IP Address, SARVAM UMG will not check the Destination
Port Determination Method. Instead, it will route the call using the SIP Trunk / Group programmed for IP
Dialing. (See "IP Dialing"
Route Calls without any Destination Number
In this method, all calls received on the T1E1 Port are directly routed to the destination port, irrespective of the
Destination Number.
• To apply this method, in Route all incoming calls (with CLI), select without any Destination Number.
Route to a Fixed Destination Number
In this method, calls received on the T1E1 Port are routed to a fixed destination number, which is configured for the
T1E1 Port.
Matrix SARVAM UMG System Manual
to know more).
344