Matrix Telecom SARVAM UMG System Manual page 199

• The BRI Port 1 - Call Routing - Channel Number Wise window opens.
• To configure Channel 1 parameters, click CH-1.
• The BRI Port 1 Channel Number 1 window opens.
• Assign a Name to the channel for identification.
• Under Handling of Calls - Channel Number Wise configure the following parameters.
• Keep the Block calls received on this channel check box disabled.
Select this check box only if you do not want to route calls received on this channel.
• SARVAM UMG supports 8 Dial Plans with total 64 entries in each table. When a user dials a number, it
is compared with the Destination Number configured in the Dial Plan. If a match is found, the system
routes the call immediately without waiting for End of Dialing and if a match is not found, the system will
193 Matrix SARVAM UMG System Manual