Configuring Eternity Genx - Matrix Telecom SARVAM UMG System Manual

CHAPTER 6
ETERNITY GENX Platform provides a Graphic User Interface (GUI), Jeeves, the proprietary web-based
configuration software of Matrix. The built-in web server Jeeves allows you to select the Application you want to run
on the ETERNITY GENX platform.
Cards will work only after you select the application you want to run on the ETERNITY GENX Platform.
The accessibility to the Web-based GUI is secured by a password. This password cannot be used to configure the
system using commands.
To be able to access Jeeves,
• the LAN/WAN Port of ETERNITY GENX must be connected with a stand-alone PC or in a LAN.
• a web-browser, either Internet Explorer 7 or later or Mozilla Firefox 3.5.1 or later, must be installed on the
PC.
If the computer for accessing Jeeves is connected in a LAN Switch and the WAN Port of SARVAM UMG is
connected behind a NAT router, make sure that both the LAN and WAN connections are in different
Subnet Masks.
To login,
• Open the browser (Internet Explorer/Mozilla Firefox) on the PC (Standalone or LAN PC) to which the
ETERNITY GENX is connected.
• Make sure the IP Address of the computer and the LAN Port of ETERNITY GENX do not conflict, and that
both are in the same Subnet.
The default IP Address of the LAN Port is: 192.168.2.100
The default Subnet Mask of the LAN Port is: 255.255.255.000
Change the Subnet of the computer, if necessary.
• In the address bar of the browser, enter https://192.168.2.100.
Matrix SARVAM UMG System Manual
Configuring ETERNITY
GENX
75