Matrix Telecom SARVAM UMG System Manual page 441

• Select the Block calls through this port check box, if you do not want to route outgoing calls though this
port.
• Enable Route Return calls of unconnected calls to Original Caller check box, if you want SARVAM
UMG to route outgoing calls made from this port that return unconnected back to the original caller.
Default: Disabled.
If you enable this feature, when an outgoing call is made using this port, and the Called Party is found busy
or does not respond, SARVAM UMG stores the number of the calling party, the number of the called party
and this port (through which the outgoing call was made). A record of each such call is stored for the
duration of the Unconnected Calls Record Delete Timer (configurable; default: 999 minutes).
If the called party returns the call before the expiry of this Timer, SARVAM UMG checks whether Apply
RCOC only if the caller calls back on the same trunk from which the call was made is enabled or not, and
accordingly places the incoming call to the original calling party. To change the duration of this timer,
delete records of such calls and enable/disable the Apply RCOC only if the caller calls back on the same
trunk from which the call was made check box, see
• To connect the Source Port with the Destination Port without waiting for the call on the Destination Port to
mature, enable the Connect Source Port when number is outdialed check box. Default: Disabled.
In all Destination Number Determination methods except After Answering the Call and Collecting the
Digits, the Source Port gets connected to the Destination Port only after the call has matured, that is, the
called party has answered the call. Until the call matures, the caller hears only Ring Back Tone played by
the network.
By connecting the Source Port with the Destination Port immediately after the number is dialed, the caller
can know the state of the call; if the called party is busy, not responding, not reachable or is rejecting the
call.
• Enable Connect Source Port when Progress Indicator is received on T1E1 Port check box, to connect
Source Port with the Destination Port as soon as Progress Indicator is received on T1E1 Port without
waiting for the call on the Destination Port to mature. Default: Disabled.
If you enable Connect Source Port when Progress Indicator is received on T1E1 Port, you will not be able
to provide the features
Code" to users.
• Click Submit to save settings.
Handling of Calls
If you have selected Network as Orientation Type,
• Select the method to route the incoming calls from the T1E1 Port.
SARVAM UMG provides two options for Handling of Calls when the Port is set in Network mode.
435
"Making a New Call using Access Code"
"System Parameters".
and "Disconnecting a Call using Access
Matrix SARVAM UMG System Manual