Matrix Telecom SARVAM UMG System Manual page 676

The system will retransmit the messages at regular time intervals you have configured as Retry
Interval. Default: 10 seconds.
• Configure the Notification Destination. SARVAM UMG will send the notification (error message) to
the destination configured.
The Notification Destination can be an IP Address or a Domain Name and the Port of the Manager or of
any other device where you want to receive the trap messages. IP Address/Domain Name can be a
maximum of 64 characters. Valid range is 0 to 65535. Default: 162.
• Click Submit button to save the settings.
Notification Filters
By default, you get error notifications, information and warnings for events related to the Application, Network and
all Port Types. See table at the end of this topic for the event list. You can choose the type of notification you want
by setting the notification filters.
To set filters,
Click Notification Filters to expand.
To disable any filter, clear the respective check box.
Make sure that you have uploaded the MIB in your SNMP Manager to get the status and notifications for
SNMP. Contact Matrix Support Team for the MIB files.
Matrix SARVAM UMG System Manual 670