Matrix Telecom SARVAM UMG System Manual page 481

Hide thumbs Also See for SARVAM UMG:

Table of Contents

The IP Address List for Server Access window opens. You can store 10 entries in this table.

Enter the IP Addresses and their respective Subnet Mask in the table.

Click Submit and close the window.

SARVAM UMG will allow system access only to those users whose IP Address matches with the one

configured in the IP Address List for Server Access.

Select the Block ICMP on WAN check box, if you want the system to discard the ICMP packets

received on WAN. Default: Disabled.

Select the Block PING on WAN check box, if you want the system to discard the PING request

received on WAN. Default: Disabled.

Blocking of PING on WAN will prevent your network from being pinged or detected by other Internet

users to acquire your IP Address.

Click Certificate to expand and select the certificate for each of the following.

In Local Certificate for TLS, select the certificate to be used by the system for TLS.

Matrix SARVAM UMG System Manual

Need help?

Do you have a question about the SARVAM UMG and is the answer not in the manual?