Table of Contents
Advertisement
Port Wise
To configure Handling of Incoming Calls Port Wise,
•
Select the Port Wise check box.
•
Click Settings
•
The Handling of Incoming Calls - Port Wise window opens.
•
Keep the Block calls received on this port check box disabled.
Select this check box only if you do not want to route calls received on this port.
Destination Number Determination
Select the desired destination number determination method for routing incoming calls with and without CLI.
•
To Route all Incoming calls (with CLI), you may select from any of the following methods:
•
without any Destination Number
•
to a Fixed Destination Number
•
on the basis of Calling Party Number
•
on the basis of DDI Number
•
to the Called Party Number
•
after Answering the Call and Collecting the Digits
Default: to the Called Party Number
Read further for instructions on selecting and configuring each of these destination number determination
methods.
343
.
Matrix SARVAM UMG System Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?