Configuring Eternity Genx - Matrix Telecom SARVAM UMG Quick Start Manual

ETERNITY GENX Platform provides a Graphic User Interface (GUI), Jeeves, the proprietary web-
based configuration software of Matrix. The built-in web server, Jeeves, allows you to select the
application you want to run on the ETERNITY GENX platform.
The accessibility to the web-based GUI is secured by a password. This password cannot be used
to configure the system using commands.
To be able to access Jeeves,
• the LAN/WAN Port of ETERNITY GENX must be connected with a stand-alone PC or in a LAN.
• a web-browser, either Internet Explorer 7 or later or Mozilla Firefox 3.5.1 or later, must be
installed on the PC.
If the computer for accessing Jeeves is connected in a LAN Switch and the WAN Port of SARVAM
UMG is connected behind a NAT router, make sure that both the LAN and WAN connections are in
different Subnet Masks.
To login,
• Open the browser (Internet Explorer/Mozilla Firefox) on the PC (Standalone or LAN PC) to
which the ETERNITY GENX is connected.
• Make sure the IP Address of the computer and the LAN Port of ETERNITY GENX do not
conflict, and that both are in the same Subnet.
The default IP Address of the LAN Port is: 192.168.2.100
The default Subnet Mask of the LAN Port is: 255.255.255.000
Change the Subnet of the computer, if necessary.
Matrix SARVAM UMG Quick Start

Configuring ETERNITY GENX

25