R&S ESR Series User Manual page 535

®
R&S ESR
In the "Recall" dialog box, the items saved in the selected file are displayed.
Remote command:
MMEMory:SELect[:ITEM]:HWSettings
MMEMory:SELect[:ITEM]:LINes:ALL
MMEMory:SELect[:ITEM]:TRACe[:ACTive]
MMEMory:SELect[:ITEM]:TRANsducer:ALL
Enable all Items ← Select Items ← Save
Selects all items for saving or loading.
Remote command:
MMEMory:SELect[:ITEM]:ALL
Disable all Items ← Select Items ← Save
Selects none of the items for saving or loading.
Remote command:
MMEMory:SELect[:ITEM]:NONE
Delete File ← Save
Deletes the selected settings file.
Remote command:
MMEMory:CLEar:STATe 1,
Recall
Opens the "Recall" dialog box to load a settings file. To navigate in the dialog box, use
the corresponding softkeys.
For details see also
Path
Files
File Name
Comment
[Items]
Note: After you use the "Recall" function, the history of previous actions is deleted, i.e.
any actions performed previously cannot be undone or redone using the [UNDO/
REDO] keys.
Remote command:
MMEMory:LOAD:STATe
Startup Recall
Opens a submenu to activate or deactivate and set up the startup recall function.
User Manual 1175.7068.02 ─ 12
Saving and Recalling Settings Files – SAVE/RCL Key
on page 985
on page 986
on page 946
Chapter 10.1.2, "File Selection Dialog
Directory from which the settings file is loaded. The default path for user
settings files is C:\r_s\instr\user
List of stored settings files
Name of settings file
Comment of the settings file
Items saved in the settings file
on page 947
Data Management and Documentation
on page 985
on page 985
on page 986
on page 986
Boxes", on page 536.
532