®
R&S
ESR
MMEMory:USER<Softkey> <Filename>, <Label>
This command defines the settings file to be loaded when the specified user-definable
softkey is selected. The settings file must exist, otherwise an error occurs.
Suffix:
<Softkey>
Parameters:
<Filename>
<Label>
Example:
Example:
11.15 Network Connection
●
Configuring Network
●
Emulating HP
11.15.1 Configuring Network Connections
MMEMory:NETWork:DISConnect
MMEMory:NETWork:MAP
MMEMory:NETWork:UNUSeddrives?
MMEMory:NETWork:USEDdrives?
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
SYSTem:COMMunicate:GPIB[:SELF]:RTERminator
SYSTem:LXI:INFo?
SYSTem:LXI:LANReset
SYSTem:LXI:MDEScription
SYSTem:LXI:PASSword
MMEMory:NETWork:DISConnect <Drive>
This command disconnects the selected drive.
User Manual 1175.7068.02 ─ 12
.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
Number of the softkey in the "User" menu.
string
This parameter defines the path and file name of the settings to
be loaded.
string
This parameter defines the label of the user-definable softkey.
*RST:
User<Softkey_number>
MMEM:USER1 'C:\MySaveSets\Set1','Set1'
Loads settings file Set1 when the "Set1" softkey in the "User"
menu is selected.
MMEM:USER3 'C:\MySaveSets\Set3',''
Loads settings file Set3 when the "User3" softkey in the "User"
menu is selected.
Connections.........................................................................987
Instruments.................................................................................... 991
.................................................................................... 987
...............................................................................................988
.............................................................................. 988
.................................................................................. 989
........................................................................................................ 990
.................................................................................................. 990
............................................................................................. 990
..................................................................................................990
Network Connection
............................................................... 989
.......................................................... 989
Remote Control
987