R&S ESR Series User Manual page 195

®
R&S ESR
●
Receiver Input
For more information see
Remote command:
See
RF input:
INPut:TYPE
Prev / Next Range
Selects the scan range to the left or right of the currently selected scan range.
Remote command:
not supported
5.3.7.3 Peak Search
The "Peak Search" tab in the "Test Automation" dialog box contains functionality to
control the peak search.
Peak Search Mode (Peaks
No Of
No of Subranges / Peaks per
Peak
Margin......................................................................................................................... 193
Select Limit
Peak Search Mode (Peaks Subranges)
Selects the peak search mode.
"Peaks"
"Subranges"
User Manual 1175.7068.02 ─ 12
Chapter 5.1.3.3, "The Scan
Chapter 11.4.6.2, "Scan
on page 672
Peaks................................................................................................................193
Excursion........................................................................................................... 193
Line..........................................................................................................193
Looks for a particular number of peaks over the complete scan range.
Divides the scan range into smaller subranges and looks for a partic-
ular number of peaks in each subrange.
Table", on page 674
Subranges)......................................................................192
Subrange..................................................................... 193
Receiver Mode
Common Measurement Settings
Table", on page 146.
192