R&S ESR Series User Manual page 919

®
R&S ESR
*CLS
Clear status
Sets the status byte (STB), the standard event register (ESR) and the EVENt part of
the QUEStionable and the OPERation registers to zero. The command does not
alter the mask and transition parts of the registers. It clears the output buffer.
Usage:
*ESE <Value>
Event status enable
Sets the event status enable register to the specified value. The query returns the con-
tents of the event status enable register in decimal form.
Parameters:
<Value>
*ESR?
Event status read
Returns the contents of the event status register in decimal form and subsequently
sets the register to zero.
Return values:
<Contents>
Usage:
*IDN?
Identification
Returns the instrument identification.
Usage:
Manual operation:
*IST?
Individual status query
Returns the contents of the IST flag in decimal form. The IST flag is the status bit
which is sent during a parallel poll.
Return values:
<ISTflag>
Usage:
User Manual 1175.7068.02 ─ 12
Setting only
Range: 0 to 255
Range: 0 to 255
Query only
Query only
See "*IDN Format Leg./New"
See "Versions+Options"
0 | 1
Query only
Remote Control
Common Commands
on page 518
on page 524
916