Zooming Into The Diagram - R&S ESR Series User Manual

®
R&S ESR
To display the toolbar:
1. Press the DISPLAY key.
2. Under "Select Tool Bar State", select "On".
Alternatively:
1. Press the SETUP key.
2. Press the "Display Setup" softkey.
3. Press the "Tool Bar State On/Off" softkey.
The toolbar is displayed at the top of the screen.
3.4.4.6

Zooming into the Diagram

You can zoom into the diagram to visualize the measurement results in greater detail.
Using the touchscreen or a mouse pointer you can easily define the area to be
enlarged.
Zoom and the number of sweep points
Note that zooming is merely a visual tool, it does not change any measurement set-
tings, such as the number of sweep points!
You should increase the number of sweep points before zooming, as otherwise the
function has no real effect (see the "Sweep Points" softkey, described in the Operating
Manual and online help).
To zoom into the diagram
1. Display the toolbar as described in
on page 86.
2.
Click on the "Zoom On" icon in the toolbar.
A dotted rectangle is displayed in the diagram.
User Manual 1175.7068.02 ─ 12
Chapter 3.4.4.5, "Displaying the
Quick Start
Basic Operations
Toolbar",
87