R&S ESR Series User Manual page 733

®
R&S ESR
[SENSe:]POWer:ACHannel:NAME:CHANnel<channel>
[SENSe:]POWer:ACHannel:SPACing[:ACHannel]
[SENSe:]POWer:ACHannel:SPACing:ALTernate<channel>
[SENSe:]POWer:ACHannel:SPACing:CHANnel<channel>
[SENSe:]POWer:ACHannel:TXCHannel:COUNt
[SENSe:]POWer:ACHannel:ACPairs <ChannelPairs>
This command sets the number of adjacent channels (upper and lower channel in
pairs).The figure 0 stands for pure channel power measurement.
Parameters:
<ChannelPairs>
Example:
Manual operation:
[SENSe:]POWer:ACHannel:BANDwidth|BWIDth:ACHannel <Bandwidth>
This command defines the channel bandwidth of the adjacent channel of the radio
transmission system. If the bandwidth of the adjacent channel is changed, the band-
widths of all alternate adjacent channels are automatically set to the same value.
With [SENSe<source>:]POWer:HSPeed set to ON, steep-edged channel filters are
available. For further information on filters refer to
RRC and Channel
Parameters:
<Bandwidth>
Example:
Manual operation:
[SENSe:]POWer:ACHannel:BANDwidth|BWIDth:ALTernate<channel>
This command defines the channel bandwidth of the specified alternate adjacent chan-
nels of the radio transmission system. If the channel bandwidth of one alternate adja-
cent channel is changed (e.g. channel 3), the bandwidth of all subsequent alternate
adjacent channels (e.g. 4–11) is automatically set to the same value.
User Manual 1175.7068.02 ─ 12
0 to 12
*RST:
POW:ACH:ACP 3
Sets the number of adjacent channels to 3, i.e. the adjacent
channel and alternate adjacent channels 1 and 2 are switched
on.
See "# of Adj Chan"
See "Channel Bandwidth "
Filters", on page 367 .
100 Hz to 40 GHz
*RST:
POW:ACH:BWID:ACH 30 kHz
Sets the bandwidth of all adjacent channels to 30 kHz.
See "Bandwidth"
<Bandwidth>
Remote Commands in Spectrum Analyzer Mode
..................................................... 732
............................................................. 732
................................................ 733
................................................. 733
................................................................733
1
on page 237
on page 251
Chapter 6.2.6.4, "List of Available
14 kHz
on page 238
Remote Control
730