R&S ESR Series User Manual page 206

®
R&S ESR
"Ref. Marker"
"Trace"
Remote command:
CALCulate<n>:MARKer<m>[:STATe]
CALCulate<n>:DELTamarker<m>[:STATe]
CALCulate<n>:MARKer<m>:TRACe
CALCulate<n>:DELTamarker<m>:TRACe
CALCulate<n>:DELTamarker<m>:MREF
All Marker Off ← Marker Wizard
Switches all markers off. It also switches off all functions and displays that are associ-
ated with the markers/delta markers.
Remote command:
CALCulate<n>:MARKer<m>:AOFF
All Marker Off
Switches all markers off. It also switches off all functions and displays that are associ-
ated with the markers/delta markers.
Remote command:
CALCulate<n>:MARKer<m>:AOFF
Marker Table
Defines how the marker information is displayed.
For more information, see
"On"
"Off"
"Aut"
Remote command:
DISPlay:MTABle
Marker Info (On Off)
Turns the numerical marker information in the diagram area on and off.
Remote command:
DISPlay[:WINDow<n>]:MINFo:STATe
Tune to Marker
Defines the marker frequency as the new center frequency.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:CENTer
User Manual 1175.7068.02 ─ 12
Reference marker for delta markers. The marker values for the delta
marker are indicated relative to the specified reference marker.
The reference marker can either be another active marker, or a fixed
reference marker ("FXD", see
Trace for which the marker is to be set.
on page 695
on page 691
on page 691
Displayed Marker
Displays the marker information in a table in a separate area beneath
the diagram.
Displays the marker information within the diagram area.
(Default) The marker table is displayed automatically if more than 2
markers are active, and removed if only 1 or 2 markers are active.
This helps keep the information in the display clear.
on page 866
Common Analysis Functions
"Ref Fixed" on page 419).
on page 695
on page 701
on page 701
on page 867
Information.
on page 690
on page 688
Receiver Mode
203