®
R&S
ESR
Remote command:
[SENSe:]POWer:ACHannel:PRESet
7.2 Softkeys of the Amplitude Menu in I/Q Analyzer Mode
In I/Q Analyzer mode, the "Amplitude" menu, which is displayed when you select the
[AMPT] key, contains the following functions.
If the display configuration for the I/Q Analyzer is set to "I/Q Vector" or "Real/Imag (I/
Q)", the
Functions to configure the amplitude described elsewhere:
●
"10 dB Min"
Ref
Level..................................................................................................................... 464
Y-Axis
Range..........................................................................................................................465
Unit..............................................................................................................................467
Preamp
RF Atten
Ref Level
Ref Level
Grid Abs/Rel
Noise
Input
Input 50 Ω/75 Ω
Ref Level
Opens an edit dialog box to enter the reference level in the current unit (dBm, dBµV,
etc).
The reference level is the maximum value the AD converter can handle without distor-
tion of the measured value. Signal levels above this value will not be measured cor-
rectly, which is indicated by the "IFOVL" status display.
Remote command:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel
User Manual 1175.7068.02 ─ 12
Range
and
Unit
functions are not available.
on page 181
Max.................................................................................................................. 465
└
Range Log 100
dB........................................................................................ 465
└
Range Log 50
dB.......................................................................................... 465
└
Range Log 10
dB.......................................................................................... 465
└
Range Log 5
dB............................................................................................ 466
└
Range Log 1
dB............................................................................................ 466
└
Range Log
Manual........................................................................................466
└
Range Linear
%............................................................................................ 466
└
Range Lin.
Unit............................................................................................. 466
On/Off............................................................................................................ 467
Auto..............................................................................................................467
Offset...........................................................................................................467
Position....................................................................................................... 468
...............................................................................................................468
Correction......................................................................................................... 468
(AC/DC)..............................................................................................................468
..........................................................................................................468
Softkeys of the Amplitude Menu in I/Q Analyzer Mode
on page 725
I/Q Analyzer
on page 845
464