R&S ESR Series User Manual page 209

®
R&S ESR
Remote command:
Next Peak:
CALC:MARK:MAX:LEFT (<):
on page 691
CALCulate<n>:DELTamarker<m>:MAXimum:LEFT
CALC:MARK:MAX:RIGH (>):
on page 693
CALCulate<n>:DELTamarker<m>:MAXimum:RIGHt
CALC:DELT:MAX:NEXT (abs):
on page 692
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT
Next Min:
CALC:MARK:MIN:LEFT (>):
on page 693
CALCulate<n>:DELTamarker<m>:MINimum:LEFT
CALC:MARK:MIN:RIGH (>):
on page 694
CALCulate<n>:DELTamarker<m>:MINimum:RIGHt
CALC:MARK:MIN:NEXT (abs):
on page 693
CALCulate<n>:DELTamarker<m>:MINimum:NEXT
Search Limits
Opens a submenu to set the limits for maximum or minimum search in the x and y
direction.
Remote command:
CALCulate<n>:MARKer<m>:X:SLIMits[:STATe]
Left Limit ← Search Limits
Opens an edit dialog box to enter a value for the lower limit (left vertical line: S1 for
span > 0; T1 for zero span). The search is performed between the lines of the left and
right limit (see also
Remote command:
CALCulate<n>:MARKer<m>:X:SLIMits:LEFT
Right Limit ← Search Limits
Opens an edit dialog box to enter a value for the upper limit (left vertical line: S2 for
span > 0; T2 for zero span). The search is performed between the lines of the left and
right limit (see also
the stop frequency.
Remote command:
CALCulate<n>:MARKer<m>:X:SLIMits:RIGHT
Threshold ← Search Limits
Opens an edit dialog box to define the threshold line. The threshold line represents the
lower level limit for a "Peak" search and the upper level limit for a "Min" search.
User Manual 1175.7068.02 ─ 12
CALCulate<n>:MARKer<m>:MAXimum:LEFT
CALCulate<n>:MARKer<m>:MAXimum:RIGHt
CALCulate<n>:MARKer<m>:MAXimum:NEXT
CALCulate<n>:MARKer<m>:MINimum:LEFT
CALCulate<n>:MARKer<m>:MINimum:RIGHt
CALCulate<n>:MARKer<m>:MINimum:NEXT
Right Limit softkey).
Left Limit softkey). If no value is set, the upper limit corresponds to
Receiver Mode
Common Analysis Functions
on page 698
on page 699
on page 698
on page 699
on page 700
on page 700
on page 690
on page 689
on page 689
206