R&S ESR Series User Manual page 857

®
R&S ESR
TRACe<n>:COPY <TraceNumber>, <TraceNumber>
This command copies data from one trace to another.
Suffix:
<n>
Parameters:
<TraceNumber>,
<TraceNumber>
Example:
Manual operation:
TRACe<n>:DATA <Trace>, <Data> | <ResultType>
This command queries current trace data and measurement results.
If you use it as a setting command, it transfers trace data from an external source to
the R&S ESR.
The data format depends on FORMat[:DATA].
Parameters:
<Trace>
<Data>
Query parameters:
<ResultType>
Return values:
<TraceData>
Example:
Example:
Manual operation:
User Manual 1175.7068.02 ─ 12
Remote Commands in Spectrum Analyzer Mode
.
window; For applications that do not have more than 1 measure-
ment window, the suffix <n> is irrelevant.
TRACE1 | TRACE2 | TRACE3 | TRACE4 | TRACE5 | TRACE6,
TRACE1 | TRACE2 | TRACE3 | TRACE4 | TRACE5 | TRACE6
The first argument is the destination of the data to be copied, the
second argument describes the source.
TRAC:COPY TRACE1,TRACE2
See "Copy Trace" on page 199
Selects the trace to write data to.
TRACE1 | ... | TRACE6
Contains the data to transfer.
Selects the type of result to be returned.
TRACE1 | ... | TRACE6
Returns the trace data for the corresponding trace.
LIST
Returns the results of the peak list evaluation for Spurious Emis-
sion and Spectrum Emission Mask measurements.
SPURious
Returns the peak list of Spurious Emission measurements.
For more information see tables below.
TRAC TRACE1,+A$
Transfers trace data ('+A$') to trace 1.
TRAC? TRACE3
Queries the data of trace 3.
See "List Evaluation (On/Off)"
See "List Evaluation (On/Off)"
Remote Control
on page 264
on page 293
854