®
R&S
ESR
Manual operation:
Retrieving Measurement Results
The following commands analyze and retrieve measurement results for time domain
power measurements.
Commands useful to retrieve results described elsewhere:
●
TRACe<n>:DATA
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:MEAN:AVERage:RESult?
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:MEAN:PHOLd:RESult?
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:MEAN:RESult?
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:MEAN[:STATe]
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:PPEak:AVERage:RESult?
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:PPEak:PHOLd:RESult?
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:PPEak:RESult?
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:PPEak[:STATe]
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:RMS:AVERage:RESult?
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:RMS:PHOLd:RESult?
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:RMS:RESult?
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:RMS[:STATe]
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:SDEViation:AVERage:RESult?
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:SDEViation:PHOLd:RESult?
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:SDEViation:RESult?
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:SDEViation[:STATe]
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:MEAN:AVERage:RESult?
This command queries the average mean time domain power. The query is only possi-
ble if averaging has been activated previously using
FUNCtion:SUMMary:AVERage.
To get a valid result, you have to perform a complete measurement with synchroniza-
tion to the end of the measurement before reading out the result. This is only possible
for single sweeps.
Suffix:
<n>
<m>
Return values:
<MeanPower>
User Manual 1175.7068.02 ─ 12
Remote Commands in Spectrum Analyzer Mode
See
"Time Domain Power (zero span)"
See
"Time Domain Power"
on page 726
.
Selects the measurement window.
Selects the marker.
Mean power of the signal during the measurement time.
Remote Control
on page 224
on page 296
....................... 802
.......................... 803
...................................... 803
.......................................804
...................... 804
..........................805
..................................... 805
...................................... 806
......................... 806
.............................807
........................................ 808
......................................... 808
................... 809
...............................810
................................810
CALCulate<n>:MARKer<m>:
................ 809
802