Table of Contents
Advertisement
®
R&S
ESR
Results are provided for the TX channel and the number of defined adjacent channels
above and below the TX channel. If more than one TX channel is defined, the carrier
channel to which the relative adjacent-channel power values should be referenced
must be defined.
The measured power values for the TX and adjacent channels are also output as a
table in the second screen. Which powers are measured depends on the number of
configured channels, see
For each channel, the following values are displayed:
Label
Channel
Bandwidth
Offset
Power
(Lower/Upper)
User Manual 1175.7068.02 ─ 12
"# of Adj Chan"
Description
Channel name as specified in the "Channel Settings" (see
Configured channel bandwidth (see
Offset of the channel to the TX channel (Configured channel spacing, see
on page 239)
The measured power values for the TX and lower and upper adjacent channels. The
powers of the transmission channels are output in dBm or dBm/Hz, or in dBc, relative
to the specified reference TX channel.
Spectrum Measurements
on page 237.
"Bandwidth"
on page 238)
Measurements
"Names"
on page 240).
"Spacing"
230
- Quick Links:
- Service Manual
Hide quick links:
Advertisement
Table of Contents
