R&S ESR Series User Manual page 518

®
R&S ESR
Furthermore, some special GPIB settings are available to emulate HP models (see
Chapter 11.18, "GPIB Commands of HP Models 856xE, 8566A/B, 8568A/B and
8594E",
●
"GPIB Language"
●
"IF Gain (Norm/Puls)"
●
"Sweep Repeat (On/Off)"
●
"Coupling (FSx/HP)"
"Default"
"R&S FSP"
"R&S FSU"
Remote command:
SYSTem:COMPatible
Mode Default ← Compatibility Mode ← GPIB ← General Setup
Resets the number of measurement points and available bandwidths to default
R&S ESR values.
Remote command:
SYST:COMP DEF, see
Mode R&S FSP ← Compatibility Mode ← GPIB ← General Setup
Sets the number of measurement points and available bandwidths as in R&S FSP
devices.
Remote command:
SYST:COMP FSP, see
Mode R&S FSU ← Compatibility Mode ← GPIB ← General Setup
Sets the number of measurement points and available bandwidths as in R&S FSU
devices.
Remote command:
SYST:COMP FSU, see
GPIB Language ← Compatibility Mode ← GPIB ← General Setup
Opens a list of selectable remote-control languages:
Language
SCPI
71100C
71200C
71209A
8560E
8561E
8562E
8563E
User Manual 1175.7068.02 ─ 12
Instrument Setup and Interface Configuration – SETUP Key
on page 1039):
on page 515
on page 516
on page 516
on page 517
Standard R&S ESR operation, see
Compatible to R&S FSP, see
Compatible to R&S FSU, see
on page 920
SYSTem:COMPatible
SYSTem:COMPatible
SYSTem:COMPatible
Comment
Compatible to 8566A/B
Compatible to 8566A/B
Compatible to 8566A/B
System Configuration
"Mode Default" on page 515
"Mode R&S FSP" on page 515
"Mode R&S FSU" on page 515
on page 920
on page 920
on page 920
515