R&S ESR Series User Manual page 677

®
R&S ESR
TRACe<n>:FEED:CONTrol<t> <Occasion>
This command turns block data transmission during a scan on and off.
The availability of data is reported in the STATus:OPERation-Register.
The block size depends on scan time and the upper limit defined by
POINts
Suffix:
<n>
<t>
Parameters:
<Occasion>
Example:
TRACe<n>:POINts LIMit, <Points>
This command defines the maximum number of measurement pointsthat are transfer-
red in one block after using TRAC? SCAN.
The total amount of bytes which is transferred depends on the number of active traces.
Suffix:
<n>
Parameters:
<Points>
Example:
11.4.6.2 Scan Table
[SENSe:]SCAN<range>:BANDwidth:RESolution
[SENSe:]SCAN<range>:INPut:ATTenuation
[SENSe:]SCAN<range>:INPut:ATTenuation:AUTO
[SENSe:]SCAN<range>:INPut:GAIN:AUTO
[SENSe:]SCAN<range>:INPut:GAIN[:STATE]
[SENSe:]SCAN<range>:INPut:TYPE
[SENSe:]SCAN:RANGes[:COUNt]
[SENSe:]SCAN<range>:STARt
[SENSe:]SCAN<range>:STEP
User Manual 1175.7068.02 ─ 12
on page 674.
.
irrelevant
Selects a trace.
ALWays
Block data transmission is on.
NEVer
Block data transmission is off.
*RST:
TRAC:FEED:CONT ALW
Switches to single sweep mode.
.
irrelevant
Range:
*RST:
TRAC:POIN LIM, 8000
Transfers a maximum of 8000 measurement values per trace
with a single query.
................................................................................... 676
........................................................................................677
........................................................................................ 677
Remote Commands in Receiver Mode
NEVer
1 to 10000
1000
............................................................... 675
...................................................................... 675
............................................................ 675
...................................................................... 676
................................................................... 676
............................................................................... 676
Remote Control
TRACe<n>:
674