R&S ESR Series User Manual page 910

®
R&S ESR
Usage:
Manual operation:
SOURce<n>:POWer:STOP <Power>
This command defines the stop power of the power sweep. The stop value can be
smaller than the start value.
Suffix:
<n>
Parameters:
<Power>
Example:
Usage:
Manual operation:
11.7.2 Controlling the External Tracking Generator
[SENSe:]CORRection:TRANsducer:GENerator
SOURce<n>:EXTernal<generator>:FREQuency
SOURce<n>:EXTernal<generator>:FREQuency:COUPling[:STATe]
SOURce<n>:EXTernal<generator>:FREQuency[:FACTor]:DENominator
SOURce<n>:EXTernal<generator>:FREQuency[:FACTor]:NUMerator
SOURce<n>:EXTernal<generator>:FREQuency:OFFSet<m>
SOURce<n>:EXTernal<generator>:FREQuency:SWEep[:STATe]
SOURce<n>:EXTernal<generator>:POWer[:LEVel]
SOURce<n>:EXTernal<generator>:ROSCillator[:SOURce]
SOURce<n>:EXTernal<generator>[:STATe]
SYSTem:COMMunicate:GPIB:RDEVice:GENerator<generator>:ADDRess
SYSTem:COMMunicate:RDEVice:GENerator<generator>:INTerface
SYSTem:COMMunicate:RDEVice:GENerator<generator>:LINK
SYSTem:COMMunicate:RDEVice:GENerator<generator>:TYPE
[SENSe:]CORRection:TRANsducer:GENerator <Name>
This command uses the normalized measurement data to generate a transducer factor
with up to 625 points. The trace data is converted to a transducer with unit dB and
stored in a file with the specified name and the suffix.trd under c:\r_s\instr\trd.
The frequency points are allocated in equidistant steps between start and stop fre-
quency. The generated transducer factor can be further adapted using the commands
of the [SENSe<source>:]CORRection:TRANSducer subsystem (see
]CORRection:TRANsducer:DELete
This command is only available if the R&S FSV-B10 option (External Tracking Genera-
tor) is installed and normalization is switched on.
User Manual 1175.7068.02 ─ 12
Remote Commands to Control the Tracking Generator
SCPI confirmed
See "Power Sweep Start"
.
1...4
Selects the measurement window.
Range: -30 dBm to +5 dBm
*RST: 0 dBm
SOUR:POW:STOP -20dBm
SCPI confirmed
See "Power Sweep Stop"
................................................................. 907
................................................................908
...................................................................... 912
on page 952).
on page 480
on page 480
.................................... 908
..............................909
................................. 909
............................................. 910
........................................ 911
............................................................911
................................................. 911
.......................... 913
................................... 913
.......................................... 913
.........................................914
Remote Control
[SENSe:
907