R&S ESR Series User Manual page 661

®
R&S ESR
<m>
Example:
Usage:
CALCulate<n>:MARKer<m>:SGRam:Y:MINimum:NEXT
This command positions the specified marker on the next minimum level of the vertical
axis. The search includes frames above and below the current marker position. It does
not change the horizontal position of the marker.
The command is available for the spectrogram.
Suffix:
<n>
<m>
Example:
Usage:
CALCulate<n>:MARKer<m>:SGRam:Y:MINimum[:PEAK]
This command positions the specified marker on the current minimum level of the verti-
cal axis. The search is performed over all captured frames. It does not change the hori-
zontal position of the delta marker.
The command is available for the spectrogram.
Suffix:
<n>
<m>
Example:
Usage:
User Manual 1175.7068.02 ─ 12
1...16
Selects the marker.
CALC:MARK2:SGR:Y:MIN
Activates and positions marker 2 on the minimum level of the y-
axis.
CALC:MARK2:SGR:Y:MAX:BEL
Positions marker 2 on the next minimum level found in the dia-
gram area below the current marker position.
Event
.
1...4
Selects the measurement window.
1...16
Selects the marker.
CALC:MARK2:SGR:Y:MIN
Activates and positions marker 2 on the minimum level of the y-
axis.
CALC:MARK2:SGR:Y:MIN:NEXT
Positions marker 2 on the next minimum level.
Event
.
1...4
Selects the measurement window.
1...16
Selects the marker.
CALC:MARK2:SGR:Y:MIN
Activates and positions marker 2 on the minimum level of the y-
axis.
Event
Remote Control
Remote Commands in Receiver Mode
658