R&S ESR Series User Manual page 550

®
R&S ESR
You can select to include the following types of information. (Note that the Spectrum
application does not support all elements.)
●
Header
Adds a page header to the dataset.
For more information see
on page 547.
●
Settings
Adds the general measurement configuration to the dataset (for example the fre-
quency range, the resolution bandwidth or the measurement time).
●
Scan Table
Adds the configuration for each scan subrange as defined in the scan table to the
dataset. For more information see
●
Diagram
Adds a screenshot of the scan trace to the dataset.
●
Final Results
Adds the (numerical) results of the final measurement to the dataset.
●
Transducer Table
Adds the transducers that you are using for the measurement, and their character-
istics to the dataset.
For more information see
●
Scan Result List
Adds the numerical scan results to the dataset.
Note that the test report will show only the results of the first 50000 measurement
points. The rest is cut off.
●
IF Analysis
Adds a screenshot of the IF analysis trace to the dataset.
●
Spectrogram
Adds a screenshot of the spectrogram trace to the dataset.
●
IF Analysis Spectrogram
Adds a screenshot of the IF analysis spectrogram trace to the dataset.
●
Markers
Adds the marker information to the dataset.
●
Date
Adds a time stamp to the dataset (system date and time).
●
Page Count
Adds a page count to the dataset.
Remote command:
HCOPy:TREPort:ITEM:SELect
Designing the Header of the Test Report
The "Header" tab selects the information displayed in the page header.
You can create page headers consisting of up to seven lines, plus one picture (for
example a company logo). Each of the seven lines consists of a title (which is printed
in bold characters) and a value (which is displayed next to the title, but in normal char-
acters). In addition, you can select how each line in the header is treated (the visibil-
ity).
User Manual 1175.7068.02 ─ 12
Data Management and Documentation
"Designing the Header of the Test Report"
Chapter 5.3.7.2, "Scan
"Transducer" on page 507.
on page 966
Working with Test Reports
Table", on page 189.
547