R&S ESR Series User Manual page 331

®
R&S ESR
Defining gated triggering
1. Press the "Gated Trigger" softkey to activate gated triggering (see
(On/Off)"
2. Press the "Gate Ranges" softkey to open the "Gate Ranges" dialog (see
Ranges"
3. Define the length of the period to be analyzed in the "Period" field.
Note: The period is the same for all traces. If you change the period for one trace,
it is automatically changed for all traces.
Make sure the defined period is not longer than the acquisition time of the current
measurement. Keep in mind that the acquisition time depends on the bandwidth
and the number of samples settings (see
on page 313). The current acquisition time is indicated as "AQT" in the channel bar.
User Manual 1175.7068.02 ─ 12
on page 320).
on page 320).
Spectrum Measurements
"Selecting the number of samples"
Measurements
"Gated Trigger
"Gate
328