R&S ESR Series User Manual page 911

®
R&S ESR
Parameters:
<Name>
Example:
Manual operation:
SOURce<n>:EXTernal<generator>:FREQuency <Frequency>
This command defines a fixed source frequency for the external tracking generator.
This command is only valid for the External Tracking Generator option (R&S FSV-B10).
Suffix:
<n>
<m>
Parameters:
<Frequency>
Example:
Manual operation:
SOURce<n>:EXTernal<generator>:FREQuency:COUPling[:STATe] <State>
This command couples or decouples the analyzer and generator frequencies.
This command is only valid for the External Tracking Generator option (R&S FSV-B10).
Suffix:
<generator>
Parameters:
<State>
Example:
Manual operation:
User Manual 1175.7068.02 ─ 12
Remote Commands to Control the Tracking Generator
'<name>
CORR:TRAN:GEN 'SMU01'
Creates the transducer file C:\r_s\instr\trd\SMU01.trd.
See "Save As Trd Factor"
.
1...4
window
1 | 2
tracking generator
Source frequency of the external tracking generator.
*RST: RST value
SOUR:EXT2:FREQ 10MHz
See "(Fixed) Generator Frequency"
.
1 | 2
tracking generator
ON | OFF
ON
OFF
The fixed frequency defined using
EXTernal<generator>:FREQuency
quency.
*RST: OFF
SOUR:EXT2:FREQ:COUP ON
See "Source Frequency Coupling"
Remote Control
on page 479
on page 488
SOURce<n>:
is used as a source fre-
on page 488
908