R&S ESR Series User Manual page 924

®
R&S ESR
Example:
Usage:
Manual operation:
SYSTem:DISPlay:UPDate <State>
In remote control mode, this command switches on or off the instrument display. If
switched on, only the diagrams, traces and display fields are displayed and updated.
The best performance is obtained if the display output is switched off during remote
control.
Parameters:
<State>
Example:
Manual operation:
SYSTem:FIRMware:UPDate
This command starts a firmware update using the *.msi files in the selected directory.
The default path is D:\FW_UPDATE. The path is changed via the
command. To store the update files the
Only user accounts with administrator rights can perform a firmware update.
Example:
Usage:
Manual operation:
SYSTem:FORMat:IDENt <Format>
This command defines the response format to the
function is intended for re-use of existing control programs together with the R&S ESR.
Parameters:
<Format>
User Manual 1175.7068.02 ─ 12
SYST:COMP FSP
SCPI confirmed
See "Compatibility Mode"
See "Mode Default" on page 515
See "Mode R&S FSP"
See "Mode R&S FSU"
ON | OFF
*RST: OFF
SYST:DISP:UPD ON
See "Display Update (On/Off)"
MMEMory:DATA
SYST:FIRM:UPD 'D:\FW_UPDATE'
Starts the firmware update from directory "D:\FW_UPDATE".
Event
See "Firmware Update"
FSL | LEGacy | NEW
LEGacy
Format is compatible to the R&S FSP/FSU/FSQ family
NEW
R&S ESR format
FSL
Format is compatible to the R&S FSL family
System Configuration
on page 514
on page 515
on page 515
on page 518
MMEMory:COMMent
command is used.
on page 525
on page 916 command. This
*IDN?
Remote Control
921