R&S ESR Series User Manual page 227

®
R&S ESR
Spurious Emissions
Opens a submenu to configure the Spurious Emissions measurement.
The Spurious Emissions measurement defines a measurement that monitors unwan-
ted RF products outside the assigned frequency band generated by an amplifier.
For details see
Remote command:
SENS:SWE:MODE LIST, see
Time Domain Power (zero span)
Activates the power measurement in zero span and opens a submenu to configure the
power measurement. For details see
Span",
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary[:STATe]
All Functions Off
Switches off all power measurement functions.
APD
Activates the function to measure the amplitude probability density (APD) and opens a
submenu.
For details see
on page 312.
Remote command:
CALCulate<n>:STATistics:APD[:STATe]
CCDF
Activates the function to measure the complementary cumulative distribution function
(CCDF) and opens a submenu.
For details see
on page 312.
Remote command:
CALCulate<n>:STATistics:CCDF[:STATe]
TOI
Opens a submenu and activates the measurement of the 3rd order intercept point.
For details see
on page 330.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:TOI[:STATe]
CALCulate<n>:MARKer<m>:FUNCtion:TOI:RESult?
AM Mod Depth
Opens a submenu and activates the measurement of the AM modulation depth. An
AM-modulated carrier is required on the screen to ensure correct operation.
For details see
User Manual 1175.7068.02 ─ 12
Chapter 6.1.1.6, "Measuring Spurious
on page 294.
Chapter 6.1.1.10, "Calculating Signal Amplitude
Chapter 6.1.1.10, "Calculating Signal Amplitude
Chapter 6.1.1.11, "Measuring the Third Order Intercept Point
Chapter 6.1.1.12, "Measuring the AM Modulation
[SENSe:]SWEep:MODE
Chapter 6.1.1.7, "Measuring the Power in Zero
on page 792
on page 792
Spectrum Measurements
Measurements
Emissions", on page 283.
on page 761
on page 801
Statistics",
Statistics",
on page 790
on page 791
Depth", on page 336.
(TOI)",
224