R&S ESR Series User Manual page 308

®
R&S ESR
●
Detector
Selects the detector for the final measurement.
For more information see
●
Auto Peak
Turns automatic peak search for all markers on and off.
For more information see
●
Dwell Time
Sets the dwell time for all markers.
For more information see
●
All Markers Off
Turns all markers off.
Remote command:
Reference marker:
CALCulate<n>:DELTamarker<m>:MREF
Trace:
CALCulate<n>:DELTamarker<m>:TRACe
CALCulate<n>:MARKer<m>:TRACe
Detector:
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:DETector
CALCulate<n>:DELTamarker<m>:FUNCtion:FMEasurement:DETector
on page 779
Auto peak:
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:PSEarch:AUTO
on page 781
Dwell time:
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:DWELl
All marker off:
CALCulate<n>:MARKer<m>:AOFF
CALCulate<n>:DELTamarker<m>:AOFF
See also the documentation of the base unit for information on how to remotely work
with markers in general.
Final Evaluation
The reference section contains an overview of all functions that are part of the chapter
and lists the associated elements of the user interface.
Dwell Time
Sets the dwell time for the EMI marker measurement.
For more information see
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:DWELl
Marker Table
If more than two markers have been activated, the application adds a marker table to
the display below the diagram area. The size of the table depends on the number of
markers that are active. It contains the following information for every marker.
User Manual 1175.7068.02 ─ 12
Chapter 5.2.2, "Detectors",
"Performing a Peak Search"
"Measuring at the Marker Position"
on page 701
on page 695
on page 691
on page 697
"Measuring at the Marker Position"
Spectrum Measurements
Measurements
on page 167.
on page 299.
on page 300.
on page 780
on page 780
on page 300.
on page 780
305