R&S ESR Series User Manual page 639

®
R&S ESR
INSTrument:DELete <ChannelName>
This command deletes a spectrum display.
Also see
●
INSTrument:CREate[:NEW]
●
Remote program example:
on page 1037
Parameters:
<ChannelName>
Example:
INSTrument[:SELect] <Mode> | <ChannelName>
This command activates a new measurement channel with the defined channel type,
or selects an existing measurement channel with the specified name.
●
INSTrument:CREate[:NEW]
●
Remote program example:
on page 1037
Parameters:
<Mode>
11.4 Remote Commands in Receiver Mode
The following remote commands configure and perform EMI measurements. They are
available in receiver mode only.
● Measurements and Result
● Defining the
● Configuring the Vertical
● Selecting the
● Controlling Inputs and
User Manual 1175.7068.02 ─ 12
on page 635
Chapter 11.17.16, "Usage of Four Spectrum
String containing the name of the channel you want to delete.
A channel must exist in order to be able delete it.
INST:DEL 'Spectrum 4'
Deletes the fourth spectrum display.
on page 635
Chapter 11.17.16, "Usage of Four Spectrum
RECeiver
Receiver mode
RTIMe
Realtime mode
SANalyzer
Spectrum mode
Spectrum 2 | Spectrum 3 | Spectrum 4
Selects one of the additional spectrum displays. The first spec-
trum display is always active. You can select it with SANalyzer.
A spectrum display must exist in order to be able to select it.
*RST: RECeiver
Displays......................................................................637
Frequency......................................................................................... 665
Axis................................................................................. 667
Bandwidth........................................................................................670
Outputs..............................................................................672
Remote Control
Remote Commands in Receiver Mode
Instances",
Instances",
636