R&S ESR Series User Manual page 875

®
R&S ESR
Example:
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:NOISe[:STATe] <State>
This command turns the noise measurement for all markers on or off.
If on, the R&S ESR measures the noise power density at the marker position.
The result can be queried with
RESult.
Suffix:
<n>
<m>
Parameters:
<State>
Example:
Manual operation:
Phase Noise
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise:AUTO
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise:RESult?
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise[:STATe]
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise:AUTO <State>
This command turns an automatic peak search for the fixed reference marker at the
end of a sweep on and off.
Suffix:
<n>
<m>
User Manual 1175.7068.02 ─ 12
Remote Commands in Spectrum Analyzer Mode
INIT:CONT OFF
Switches to single sweep mode.
CALC:MARK2 ON
Switches on marker 2.
CALC:MARK:FUNC:NOIS ON
Switches on noise measurement.
INIT;*WAI
Starts a sweep and waits for the end.
CALC:MARK2:NOIS:RES?
Outputs the noise result of marker 2.
See "Noise Meas On/Off"
CALCulate<n>:MARKer<m>:FUNCtion:NOISe:
.
Selects the measurement window.
Selects the marker.
ON | OFF
*RST: OFF
CALC:MARK:FUNC:NOIS ON
Switches on the noise measurement.
See "Noise Meas On/Off"
.
Selects the measurement window.
irrelevant
Remote Control
on page 418
on page 418
............................................... 872
............................................ 873
............................................. 873
872