Table of Contents
Advertisement
®
R&S
ESR
2. For each trace you can define the following settings:
3. To configure several traces to predefined display modes in one step, press the but-
ton for the required function:
User Manual 1175.7068.02 ─ 12
Display Mode
Detector Auto Select
Trace Detector
●
Clear Write
●
Max Hold
●
Min Hold
●
Average
●
View
●
Blank
For details see
Chapter 5.2.3, "Trace
Activates automatic detector selection (see
activated, the "Trace Detector" setting is ignored.
Defines a specific trace detector. If one of the following settings is
defined, the "Detector Auto Select" option is deactivated.
●
"Auto Select"
on page 391
●
"Auto Peak"
on page 392
●
"Positive Peak"
on page 392
●
"Negative Peak"
on page 392
●
"Sample"
on page 392
●
"RMS"
on page 392
●
"Average"
on page 392
Spectrum Measurements
Analysis
Modes",
on page 171.
Auto Select
softkey). If
396
- Quick Links:
- Service Manual
Hide quick links:
Advertisement
Table of Contents
