R&S ESR Series User Manual page 527

®
R&S ESR
●
"Hardware Info"
●
"Versions+Options"
●
"System Messages"
●
"Clear All Messages"
Hardware Info ← System Info
Opens a dialog box that displays hardware information, e.g. on the frontend and moth-
erboard. Every listed component is described by its serial number, order number,
model information, hardware code, and hardware revision.
Remote command:
DIAGnostic<n>:SERVice:HWINfo?
Versions+Options ← System Info
Opens a dialog box that displays a list of hardware and firmware information, including:
Label
Device ID
Instrument firmware
BIOS
CPLD
MB-FPGA
Data Sheet version
<option>
"Open Source Acknowledgment:
Open"
For details on options, refer to
on page 46.
Remote command:
*IDN?
*OPT?
SYSTem:DEVice:ID?
System Messages ← System Info
Opens the "System Messages" dialog box that displays the generated system mes-
sages in the order of their occurrence. The most recent messages are placed at the
top of the list. Messages that have occurred since the last display of system messages
menu are marked with an asterisk '*'. The following information is available:
No
Message
Component
Date/Time
User Manual 1175.7068.02 ─ 12
Instrument Setup and Interface Configuration – SETUP Key
on page 524
on page 524
on page 524
on page 525
on page 916
on page 917
on page 924
device-specific error code
brief description of the message
hardware messages: name of the affected module
software messages: name of the affected software
date and time of the occurrence of the message
on page 925
Description
Unique ID of the device
Installed firmware version
Installed BIOS version
CPLD version
Motherboard FPGA version
Data sheet version of the basic device
Installed hardware and firmware options
Displays a PDF file containing information on open source code
used by the R&S ESR firmware.
Chapter 3.2.1.10, "Checking the Supplied
System Configuration
Options",
524